国产精品免费无遮挡无码永久视频 ,欧美性受xxxx,久久精品国产亚洲AV网站,亚洲国产精品久久久久婷蜜芽

The rapid mold changing system is an automatic mold changing equipment commonly used in injection molding machines, punching machines, die-casting machines, etc. Its existence can improve mold changing efficiency and help enterprises improve productivity. So, what are the safety precautions when performing rapid mold changing operations? Here are 9 tips that the editor has summarized from years of experience. Let's take a look together
1: Confirm if the air source pressure is sufficient (5kgf/cm), and the sliding switch of the air source processor is in the open state.
2: Before installing the mold, please check whether the thickness of the mold bottom plate meets the thickness requirements of the mold clamp. (allowable error ± 2mm) 3: Before clamping the mold, please confirm that all clamping devices are pushed into place to tightly fit the mold and clamping device body, and ensure that at least 2/3 of the clamping device body is in the T-groove. If interference occurs and the clamping device cannot be used, please use a manual pressure plate instead
4: When clamping the mold, observe whether the pressure values of the moving and fixed mold oil pressure gauges are within the normal working pressure range of 250kgf/cm-270kgf/cm.
5: After the clamping of the mold is completed, it must be switched to production mode. If the buzzer is constantly in the clamping mode, please check if there is any oil leakage at the oil pipe joint. If there is no oil leakage, press the reset button to eliminate the alarm.
6: When unloading the mold, please confirm that the corresponding hook of the mold has been hung and the injection molding machine is in high-pressure clamping state before operating the mold release button.
7: When unloading the mold, after the loosening of the mold is completed, please pull out all the mold clamps to a safe position before operating the crane to lift out the mold.
8: When the air pressure source is interrupted for a long time, for safety reasons, the mold needs to be removed to ensure safety.
9: Before using this system, please read the manual carefully and undergo professional training before operating. Prohibit the unauthorized use of this device. If you have any usage issues, please contact us promptly!